How to Update Genx Gx Pad 100 Firmware
The Genx Gx Pad 100 is a 10.1 inch Android tablet that runs on a dual-core processor and has 1 GB of RAM. It also has a microSD card slot, a mini HDMI port, a front camera and a rear camera. If you want to update the firmware of your Genx Gx Pad 100 tablet, you will need to follow these steps:
Genx Gx Pad 100 Firmware
Download File: https://tlniurl.com/2tK3zG
Download the firmware file from here [^1^]. Make sure you choose the correct model number of your tablet. The file name should be something like GX-P G395.zip.
Extract the zip file to your computer. You should see a folder named GX-P G395 with several files inside.
Connect your tablet to your computer using a USB cable. Make sure the tablet is turned off.
Press and hold the volume down and power buttons together for a few seconds until you see a green Android logo on the screen. This will put your tablet into recovery mode.
On your computer, open the folder named GX-P G395 and run the file named LiveSuit.exe. This is a tool that will flash the firmware to your tablet.
A pop-up window will ask you to select the firmware image file. Click on the button with three dots and browse to the folder named GX-P G395. Select the file named GX-P G395.img and click open.
Another pop-up window will ask you to confirm the firmware upgrade. Click yes.
The tool will start flashing the firmware to your tablet. You will see a progress bar on the screen. Do not disconnect or turn off your tablet during this process.
When the flashing is done, you will see a message saying \"Upgrade successful\". Click OK.
Your tablet will reboot automatically. You may need to wait for a few minutes for the first boot.
Congratulations! You have successfully updated the firmware of your Genx Gx Pad 100 tablet. You can now enjoy the new features and improvements of the latest version.Here are some more paragraphs for the article:
Before you update the firmware of your Genx Gx Pad 100 tablet, you may want to backup your data first. This will prevent any data loss in case something goes wrong during the update process. You can backup your data using a microSD card, a cloud service, or a computer. To backup your data using a microSD card, follow these steps:
Insert a microSD card into the slot on the side of your tablet.
Go to Settings > Storage and tap on the option to mount the microSD card.
Go to Settings > Backup & reset and tap on the option to backup your data.
Select the microSD card as the destination and tap on backup now.
Wait for the backup to complete and then unmount the microSD card.
To backup your data using a cloud service, follow these steps:
Go to Settings > Accounts and sync and add your Google account or any other cloud service account that you use.
Go to Settings > Backup & reset and tap on the option to backup your data.
Select the cloud service as the destination and tap on backup now.
Wait for the backup to complete and then sign out of your account.
To backup your data using a computer, follow these steps:
Connect your tablet to your computer using a USB cable.
On your computer, open the folder named GX-P G395 and run the file named ADB.exe. This is a tool that will allow you to access your tablet's files from your computer.
A command prompt window will open. Type adb devices and press enter. You should see a list of devices connected to your computer. Make sure your tablet's serial number is shown.
Type adb backup -apk -shared -all -f backup.ab and press enter. This will start backing up your data to a file named backup.ab on your computer.
Wait for the backup to complete and then disconnect your tablet from your computer.
e0e6b7cb5c